Device Settings

Device Settings are a set of parameters associated with a physical device.

Edit Device Settings

1. Click the Templates icon () and the Templates tab.
2. Navigate to the Provisioning tile.
3. Double-click the Device Settings tile.
4. The form fields that appear contains editable settings.

RoCEv2 and Cut-Through Switching

Device Settings includes settings under the Network Configuration field: RoCEv2 and Cut-Through Switching. These options can be enabled or disabled via checkbox selection. Only one of the two selections can be enabled at a time; attempting to enable both items will result in a validation error. Both options can be disabled without triggering a validation error.

Power over Ethernet Settings

Setting Name	Function
Mode	Automatic or Manual
External Battery Power Available (watts)	When the device is connected to an external battery backup, this is the maximum amount of power that the device should use to power PoE devices. This can be used to force low priority ports off when power is lost to preserve battery for higher priority ports.
External Power Available	Enter the power capability of the power supply powering the device.
Usage Threshold	Percent for comparing the currently consumed power to the allocated power. If the percentage of consumed power over allocated power is over the usage threshold, a fault condition is reported and logged.

Provisioning Security Settings

This functionality encompasses security audit interval configurations that are individually applied to each switch.

Setting Name	Function
Security Audit Interval	Frequency in minutes of rereading this Switch running configuration and comparing it to expected values. If blank, then the audit never runs.
Commit to Flash Interval	The frequency, measured in minutes, at which the Switch configuration is saved to flash. If the value is empty, the system will never commit to flash.