Security Configuration🔗
Version 6.2.0
Security Guidelines🔗
This document serves as an overview of the security features integrated into Verity networking software and GUI application.
VNetC🔗
The vNetC supports local authentication and remote authentication via RADIUS. In both cases users may be granted these access levels: admin, read-write, and read-only. An additional attribute "tech" can be granted which exposes expert-level options in the user interface.
Locally, passwords are validated against a sha256-based one-way hash. Passwords are managed from the Admin Users and Permissions panel or on the external RADIUS server.
Exposed Ports🔗
In normal operation the following ports are exposed on the vNetC:
External (WAN) network:
| PORT | Protocol | Service | Description |
|---|---|---|---|
| 3,4,8,11 | ICMP | ping | Allows external sources to ping vNetC |
| 22 | TCP | ssh | Access allowed from private |
| 68 | UDP | DHCP | Receives DHCP answers from broadcast source 67 |
| 80 | TCP | HTTP | Used for one-time-password image download operations for upgrades. These can optionally be done over HTTPS |
| 161 | TCP or UDP | SNMP | External SNMP access |
| 443 | TCP | HTTPS | Used for: Web access for users. Secure web socket (wss) user REST-based API access. Device access for discover and status. |
Management Network (if configured):
| Port | Protocol | Service | Description |
|---|---|---|---|
| 123 | UDP | ntp | Support NTP sync to devices |
| 1581 | TCP | ACS | Used by ACS system to query database |
| 1582 | TCP | ACS | Used by ACS system to receive events |
| 1958 | TCP | MACs | Receives MAC address table updates |
| 8001 | TCP | Stats | Receives statistics and performance metrics |
If the vNetC is configured without a separate management network port, these ports are exposed on the WAN interface, restricted to private (RFC1918) addresses.
RFC1918 addresses are explicitly:
- 10.0.0.0/8
- 172.16.0.0/12
- 192.168.0.0/16
- 169.254.0.0/16
Transport Encryption Standards🔗
All encrypted transports (SSH, HTTPS, WSS) meet US FIPS-140-2 security requirements for cryptographic modules.
HTTPS and Server Web Certificates🔗
The vNetC HTTPS and WSS access terminates in an "haproxy" HTTPS process. This is configured with these cipher rules for TLSv1.2:
Additionally, it utilizes these cipher suites for TLSv1.3:
These ensure a high level of encryption that is compatible with all modern browsers.
SSLv3, TLSv1.0 and TLSv1.1 are disabled.
It is recommended that vNetC's have FQDN and that administrators install a server certificate for the FQDN. When a valid certificate is provided. Strict-Transport-Security is active making SSL-stripping attacks improbable.
Available SSL Test Report
SDLC🔗
Exposed Ports🔗
In normal operation the following ports are exposed on the SDLC:
| Port | Protocol | Service | Description |
|---|---|---|---|
| 830 | TCP | Netconf | Allows provisioning and monitoring by the ACS and Vnetc |
| 443 | TCP | HTTPS | Allows limited debugging via webpage |
| 22 | TCP | SSH | Allows full debugging via CLI |
| 80 | TCP | HTTP | Not used |
| 123 | UDP | NTP | Used to sync time |
| 67 | UDP | DHCP | Used to assign IP addresses if DHCP server is enabled. |
ACS🔗
Exposed Ports🔗
In normal operation the following ports are exposed on the ACS:
| Port | Protocol | Service | Description |
|---|---|---|---|
| 5555 | TCP | TR69/HTTPS | Used for provisioning and monitoring ONTs over HTTPS |
| 5554 | TCP | TR69/HTTP | Used for provisioning and monitoring ONTs over HTTP |
| 830 | TCP | netconf | Allows provisioning and monitoring by the ACS and Vnetc |
| 514 | TCP/UDP | syslog | Used to receive system messages from devices. |
| 8888 | TCP/UDP | Vnetc | Used by Vnetc to configure and query the ACS |
| 443 | TCP | HTTPS | Allows limited debugging via cli |
| 22 | TCP | ssh | Allows full debugging via cli |
| 80 | TCP | HTTP | Not used |
| 123 | UDP | NTP | Use to sync time |
| 67 | UDP | DHCP | Used to assign IP addresses if DHCP server is enabled. |
GAIA🔗
Exposed Ports🔗
In normal operation the following ports are exposed on GAIA:
| Port | Protocol | Service | Description |
|---|---|---|---|
| 830 | TCP | Netconf | Allows provisioning and monitoring by the ACS and Vnetc |
| 514 | TCP/UDP | syslog | Used to receive system messages from devices |
| 8080 | TCP/UDP | Vnetc | Used by Vnetc to configure and query GAIA |
| 443 | TCP | HTTP | Allows limited debugging via webpage |
| 22 | TCP | ssh | Allows full debugging via cli |
BBSW🔗
Exposed Ports🔗
In normal operation the following ports are exposed on the BBSW:
| Port | Protocol | Service | Description |
|---|---|---|---|
| 830 | TCP | Netconf | Allows provisioning and monitoring of the by ACS and Vnetc |
| 514 | TCP/UDP | syslog | Used to receive system messages from devices |
| 443 | TCP | HTTPS | Allows limited debugging via webpage |
| 22 | TCP | ssh | Allows full debugging via cli |
| 69 | UDP | TFTP | Allows for transfer of configuration for some switches then SNMP protocol is selected for monitoring the switch |
🔗
Client Certificate Authentication🔗
The system can be configured to support client certificate authentication. This operates in a "lockdown" mode that meets US DoD requirements. It does impose strict access requirements on all transports in the systems and demands client certificates for all users, devices, and external application access.
System Logs🔗
The system performs extensive logging of internal and device operations. Logging can be viewed from the web-based user interface, and logs can be forwarded via the syslog protocol using UDP (port 514) or TLS/TCP (port 6514). Logging is explained further under the section titled Admin Control Panel.
Serviceability🔗
The system allows download of the current system state across all management components from the web-based user interface. Nonprivileged users can collect this information in an opaque form that can only be accessed by BE engineers. Privileged users can examine the content without BE involvement.
Downloading a System Snapshot🔗
Downloading system state is performed by clicking the Snapshot Button from the Verity Web Interface. Clicking this button reveals a window prompting you to choose the data you want to capture. After you make your selection, you click Create File and then Download.
Admin Control Panel🔗
Admin is the user control panel for the VNetC.
The Admin panel contains tools useful for securing your system.
Certificate Management🔗
Certificate Management is a drag and drop control panel to import SSL Certificates.
Settings🔗
Settings lets you configure the following:
- vNetc Address on Management VLAN
- Permissible IP Address Ranges on Managed Devices
- Customized Download Address/FQDN
Monitoring, Backups and Logging🔗
Monitoring, Backups and Logging lets you configure status monitoring, backups, and loggings of the vNetc via SNMP, SFTP and SYSLOG.
System Event Log🔗
The System Event Log provides detailed information regarding all actions (user induced, equipment induced, etc.) affecting the network. Generally, when failures occur in a network, either a physical component has failed, or a user has logged in and changed provisioning. The log can be filtered on various criteria and gives the user all the details needed to view the recent history of the network.
Monitoring System Health🔗
System Graphs🔗
The System Graphs display system wide information such as Service Port activity and virtual machine performance statistics on the GUI. Graph types, subtypes and time ranges can be changed at any time. The user saves by clicking on the double check mark icon in the top right. The graph selections are saved per user.
