Network Operations🔗
There are a number of common operations that operators may perform on their network.
Network Read-Only Mode🔗
- Enable the world view by clicking the World icon (
).
- In Network tile, click the Read-Only icon (
) .
Note that read-only mode can be applied to the world, per site and per switch. All three levels are honored simultaneously and are displayed on eack switch
Also, world wide read only is automatically set during a CORE upgrade of the vNETC. It is recommended, but not required, to be set for firmware and other major system updates to allow the user to see what unexpected changes may be caused by those actions.
Switch Replacement🔗
The new device should be in ONIE mode.
- Remove the old device from service (
).
- Delete the old device (
).
- In the option box, make sure "Preserve Switchpoint" and "Disable Controller" are selected (
).
- In the Preprovisioned Switchpoint, replace the Device ID field with the new Serial Number or Service Tag (
).
- Go the disabled controller, and update the Service Tag field with the new device Serial Number or Service Tag (
).
- Re-enable the controller
Refer to the ZTP sections for the ZTP process for the switch role (ie Leaf, Spine or Management). The new switch shhould go through ONIE and ZTP process and start communicating with the Device Controller.
Add New Site Note🔗
- Enable the world view by clicking the World Icon (
) .
- Click the Note Icon (
) .
- In the pop up that appears, set focus to form field.
- Enter the text of the new site note.
- In the same popup, click the Save icon.
Device Operations🔗
Inspecting devices and performing operations on them is accomplished in the Switchpoint object in the Topology view.
Using Device Operations🔗
Zoom to a device by double clicking on it in the topology map.
Device Locks🔗
Locking a device in a Verity system causes the device to queue all changes to objects until the system or the device is switched back to the Read/Write mode.
Locking a device in a Verity system prevents users with role based access to normally manage the device (Switchpoint), to do so, until device is switched back to the Read/Write mode. This allows network admins to selectively prevent changes to an individual device.
To Lock a Device:🔗
- Enable the world view by clicking the World Icon (
) .
- Select the switch to lock by zooming into the top of the switch and clicking its lock icon (
) .
- Alternate way to access the switch is via the Devices Report. In Devices Report, find the name of the Switch you want under the Switchpoint column. Click its navigation icon.
- Click the lock icon.
Device Operational Tools🔗
Icon | Name | Function |
---|---|---|
![]() |
Show the current switch configuration | Show current switch configuration |
![]() |
MAC Address Search | Search for a MAC address on this device |
![]() |
System Log | View the system log |
![]() |
Highlighter | Highlight the device on the topology map |
![]() |
Edit | Edit the device settings |
![]() |
Lock | Locks the device |
![]() |
Delete | Delete object |
![]() |
Opens Ping/Traceroute Dialog | Open Ping/Traceroute Dialog |
![]() |
Capture Snapshot | Capture a snapshot of this device for troubleshooting - press once to start capturing and then again when capture is complete (icon turns dark green) |
![]() |
Rescan | Trigger a full rescan by the ACS of this device. |
![]() |
Open Tunnel | Open a remote access tunnel |
![]() |
Report | Open report |
![]() |
Out of Service | Mark device out of service. |
Badges🔗
Badges are used to group devices visually. Badges are assigned a name, a color and a number.
Create and Assign Badge to Device🔗
- Enable the world view by clicking the World icon (
) .
- Enable focus of a selected switch by double clicking its switchpoint.
- Click the Edit icon.
- Click Set Badges icon (
)
.
- Enable check-box nearest to Create New Badge
.
- Set focus to the form field containing the placeholder text New Badge Name.
- Enter a Badge name.
- Set focus to the form field that contains the placeholder text Color and scroll to desired color.
- Set focus to form field with the text Num and scroll to desired number.
- Click the button with text Yes.