Device Settings🔗
Edit Device Settings🔗
- Enable the world view by clicking the World Icon (
) . - Double-click the provisioning tile.
- Double-click Device Settings tile.
- The form fields that appear have settings that are editable.
Power over Ethernet Settings🔗
| Setting Name | Function |
|---|---|
| Mode | Automatic or Manual |
| External Battery Power Available (watts) | When the device is connected to an external battery backup, this is the maximum amount of power that the device should use to power PoE devices. This can be used to force low priority ports off when power is lost to preserve battery for higher priority ports. |
| External Power Available | Enter the power capability of the power supply powering the device. |
| Usage Threshold | Percent for comparing the currently consumed power to the allocated power. If the percentage of consumed power over allocated power is over the usage threshold, a fault condition is reported and logged. |
Provisioning Security Settings🔗
This functionality encompasses security audit interval configurations that are individually applied to each switch.
| Setting Name | Function |
|---|---|
| Security Audit Interval | Frequency in minutes of rereading this Switch running configuration and comparing it to expected values. If blank, then the audit never runs. |
| Commit to Flash Interval | The frequency, measured in minutes, at which the Switch configuration is saved to flash. If the value is empty, the system will never commit to flash. |